ESP32-DevKitC Board I Espressif

ESP32-DevKitC

ESP32-DevKitC is a low-footprint and entry-level
development board that is part of the ESP32 series.
This board has a rich peripheral set. The built-in
ESP32 pinout is optimized for hassle-free
prototyping!

Key Features

Wi-Fi & Bluetooth Connectivity

This minimum-system development board is powered by an ESP32 module. It integrates Wi-Fi and Bluetooth functions, and provides a rich peripheral set for rapid prototyping!

Rapid Prototyping

ESP32-DevKitC achieves optimal RF performance. You can get right into application design and development, without worrying about RF performance and antenna design. ESP32-DevKitC has your basic system-requirements already covered. Just plug in the USB cable and you are ready to go!

Flexible and Feature-Rich

ESP32-DevKitC contains the entire support circuitry of ESP32-WROOM series, ESP32-WROVER series, and ESP32-SOLO series of modules, also including a USB-UART bridge, reset- and boot-mode buttons, an LDO regulator and a micro-USB connector. Every important GPIO is available to the developer.

Breadboard-Friendly

The ESP32-DevKitC pinout is optimized to enable prototyping on a breadboard. The on-board LDO output is led out for powering up additional off-board electronics. Peripheral outputs are grouped together for hassle-free prototyping.

Amazon-Qualified Device

ESP32-DevKitC development boards are qualified by Amazon Web Services (AWS). In addition to Espressif’s own IoT development framework, ESP-IDF, you can use FreeRTOS on ESP32-DevKitC. FreeRTOS provides out-of-the-box connectivity with AWS IoT, AWS Greengrass and other AWS services.

Getting Started with FreeRTOS

Comparison of Parameters

Boards	ESP32-DevKitC-32E	ESP32-DevKitC-32UE	ESP32-DevKitCVE	ESP32-DevKitCVIE	ESP32-DevKitCS1
Related Module	ESP32-WROOM-32E	ESP32-WROOM-32UE	ESP32-WROVER-E	ESP32-WROVER-IE	ESP32-SOLO-1
Flash / PSRAM	4 MB Flash	4 MB Flash	8 MB Flash + 8 MB PSRAM	8 MB Flash + 8 MB PSRAM	4 MB Flash
Antenna	PCB	IPEX	PCB	IPEX	PCB